P-221 AMB, 1 mil Kapton® Poyimide Film Electrical Tape

Features

Thin and conformable.
Provides outstanding puncture, tear and abrasion resistance at elevated temperatures.
Aggressive, solvent resistant and high temperature adhesive.
Uniform unwind in long-length rolls promotes use in automated applications.
High performance Kapton® backing ensures consistent quality.

Product Construction

Kapton® Polyimide Film

Adhesive Layer

Application

Ideally suited for continuous high temperature operating conditions.
Recommended for use as ground, barrier and phase insulation in small, high-performance toroidal coils and high frequency motors and for end turn bundling and connection insulation in small motors.
Widely used for cross-over insulation and outer protective wraps on small bobbin wound coils, and on form wound coils for large rotating machines to bundle conductors and reinforce insulation.
Also used as printed circuit board wave solder mask and for splicing other high temperature insulating materials.

Properties

BACKING MATERIAL	1-MIL Kapton® Polyimide Film
ADHESIVE	Silicone, Cured
COLOR	Amber
Insulation Class	180 degree C
Flammability Rating	Passes UL-510 Test
Government Specifications	MIL-P-46112B, MIL-T-47325
	Imperial	Metric
Total Tape Thickness	2.6 mils	0.066 mm
Tensile Strength	36 lbs/in	63 N/10mm
Elongation	85%	85%
Adhesion to Steel	27 oz/in	3.0 N/10mm
Dielectric Strength	7,500 volts	7.5 kV

*CAUTION: The above are typical values and should not be used in writing specifications. Customer is responsible to ensure product meets intended application requirements before approved for use.

UL component Recognition Guide OANZ2, File E20392, CSA C-22.2. RoHS Compliant.